Dongguan, GuangdongThe naming principles for wire and cable products in thefactory are as follows:

1. The content included in the product name

(1) Product application scenario or size category name

(2) Product structural materials or types;

(3) Important or additional features of the product

Guangdong Dongguan Wire Factory is generally named in the order mentioned above, sometimes to emphasize important or additional features, the features are written earlier or before the corresponding structural description

2. Order of structural description

The product structure description follows the principle of from inside out: conductor -->; Insulation -->; Inner protective layer -->; Outer protective layer -->; Armor type.

3. Simplify

Without causing confusion, some structural descriptions are omitted or abbreviated, such as aluminum conductors not allowed in automotive wires and flexible cords, so the conductor material is not described.

Case:

Rated voltage 8.7/15kV flame-retardant copper core cross-linked polyethylene insulated steel tape armored polyvinyl chloride sheathed power cable (too long!)

Rated voltage 8.7/15kV - application scenario/voltage level

Flame retardant "- emphasized feature

Copper core "- conductor material

Cross linked polyethylene insulation - insulation material

Steel tape armor "- armor layer material and type (double steel tape gap wrapping)

Polyvinyl chloride sheath "- inner and outer sheath materials (the inner and outer sheath materials are the same, the inner sheath material is omitted)

Power Cable "- Product Category Name

The corresponding model is written as Zr-YJV22-8.7/15, and the writing of the model is described below